Stock code:871165
Mobile phone +8613829250070 中文
Online Message Common problem

Common problem

Your current position: Home > News> Common problem

Centralized feeding system noise causes and solutions?

Source: Popularity:5190 Publication time:2017-11-23 10:42:29 smallmiddlebig

Centralized feeding system can be a variety of raw materials for centralized dehumidification drying, color ratio, closed conveyor integration processes. The structure design of one machine and one pipe can effectively prevent the resurgence and clogging of raw materials, and can ensure the stable operation of the system. At the same time, it improves the work efficiency and ensures the product quality. If the centralized feeding system is noisy, it will not only cause irritation to the staff, but also cause the system to work abnormally if it is serious. In order to be able to effectively prevent this from happening, Hengrong professional technicians tell us about the reasons for noise and the solution of the centralized feeding system what are the solutions?

Centralized feeding system


1. Generally, if there is a lack of hydraulic oil in the tank of the centralized feeding system, the air will enter the oil pump or the oil filter will be blocked by dirt, causing the oil to bubble and discharge and touch the blades to generate noise. Then we need to check whether the fuel is enough, if not enough to add, to avoid air to enter.

2, the viscosity of the hydraulic oil is too high, resulting in poor flow, increase resistance, the need to replace the hydraulic system for the application of hydraulic oil.

3, pump or motor failure, bearing or blade damage will make the coupling concentric error occurs, resulting in noise. Need to re-adjust the concentricity or replace the intact parts.

4, centralized feeding system can work, but the directional valve failure, such as valve heart wear and tear, internal leakage, glitch plug, move insensitive, the solenoid valve due to lack of current are likely to produce noise. We need to periodically clean the valve plug to ensure clean and non-clogged, damaged parts need to be promptly replaced, the current should ensure that the supply is normal.

5, mechanical bearings wear or lack of machinery or mechanical parts loose, friction noise generated during operation. Need to fasten or replace parts, add the necessary lubricating oil.

About the central feeding system causes noise and what are the ways, today introduced here, we can routinely check the centralized feeding system maintenance, good maintenance work, to avoid centralized feeding system failure occurred noise.


Relevant information